STOP IT® PIPE REPAIR CLAMPS – While our specialty is providing composite-based solutions for pipe leaks and remediation, our product line also features universal clamp couplings, bolted couplings, flanged adapters, service saddles, tapping sleeves, expansion joints and others.
The Stop It® Pipe Repair Clamp conforms to most irregular surfaces and controls most pressures with simple hand-tightening – a simple solution for not-so-simple situations.
The polytetrafluoroethylene (PTFE) gasket on these stainless steel clamps provides extraordinary chemical resistance and works in temperatures ranging from -450°F to +650°F so you can place it and forget about it. The clamps can also be combined to fit pipes with larger diameters..
Technical Information
Physical Properties
Adjustment Range: 6” (15.2 cm) down to ½” (1.2 cm)
Materials: Band and housing made of corrosion resistant 301 CRES. Heat-treated alloy screw and nut are cadmium.
Temperature range: -450°F to 600°F (-268°C to 316°C)
Octagon Size: 1” (2.54 cm) PTFE Thickness: 1/8” (0.31750 cm)
Pressure Retention: Approximately 300 PSI when tightened with a hand tool. (Note: Make sure that pipe is in proper condition before applying any type of clamp.) Inert to all Chemicals: Only molten alkali metals and elemental fluorine will affect this material.
STOP IT® SPECIALTY CLAMPS – Clamp down on pipe leaks in highly corrosive and extreme-temperature environments
Pipes leak in all kinds of environments. And Stop It® Specialty Clamps work in the same kinds of environments.
Our line of PTFE-lined stainless steel patch clamps provide extraordinary chemical resistance and work in temperatures ranging from -450°F to +650°F so you can place it and forget about it.
Technical Information
Temperature range: -450°F to 600°F (-268°C to 316°C)
Size: 1-1/2″ (2.54 cm) -12″
PTFE Thickness: 1/8″ (0.31750 cm)
Pressure Retention: 150 PSI
Inert to all chemicals: Only molten alkali metals and elemental fluorine will affect this material.