STOP IT® GAS RISER REHABILITATION
Developed in cooperation with leading gas companies to provide a cost effective composite coating that will enhance the structural integrity of anode-less risers.
The STOP IT® Gas Riser Rehabilitation Kit is intended to strengthen the structural integrity
of the riser nipple, or riser casing on non-leaking 3/4” and 1” standard anodeless risers.
It is comprised of a strong knitted fiberglass tape coated with fast setting, water-activated
urethane resins. The STOP IT® Gas Riser Rehabilitation Kit also includes FIX STIX™, a steel
filled hand moldable epoxy that sets rock hard in only 20 minutes
Tested by the Gas Technology Institute to specific clauses of Gas Industry Standard (GIS) LC8-1:2006 Specification for Methods of Repairing Leaking Ferrous Gas Mains.
The STOP IT® Gas Riser Rehabilitation Kit is a necessary item in an inventory of products
for minimizing corrosion-related operating costs.
Kit Contents:
- STOP IT® knitted fiberglass tape precoated with water-activated polyurethane resins
- FIX STIX™ hand moldable epoxy
- Gloves for easy clean up
- Detailed directions
Technical Information
Physical Properties
Shelf Life:
2 years from date of purchase
Pressure Retention Capacity:
Recommended for pressures up to 400 psi (28 kg/cm2, 27 bar)
Temperature/Heat Resistance:
From -20°F up to 250°F (-29°C to 121°C) – continuous.
From 250°F to 500°F (121°C to 260°C) – intermittent
Set Time:
Tack free in 3 – 5 minutes at ambient temperatures of 50°F to 80°F (10°C to 27°C)
Cure Time:
Cures in 30 minutes at temperatures between 50°F to 80°F (1O°C to 27°C)
Tensile Strength:
ASTM D 3039, 24,950 PSI / in width/172 MPa
Flexural Yield Strength:
ASTM D 790-1-B, 12,005 PSI (844 kg/cm2)
Durometer Hardness:
ASTM D 2240, 63 (Shore D)